Cookies help us run our site more efficiently.

By clicking “Accept”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts. View our Privacy Policy for more information or to customize your cookie preferences.

‘I wouldn’t put my damn daughter in these’: Toxic ‘forever chemicals’ lurk in feminine products

News Feed
Wednesday, April 3, 2024

This is the first story in a series, "Fighting 'Forever Chemicals': Woman face pervasive PFAS risks." Jessian Choy had worn Thinx menstrual underwear for years before she learned they contained “forever chemicals.”  “I had always known that anything water, grease and stain resistant could have toxic PFAS chemicals in them because of my day job at the time,” said Choy, who was working in San Francisco’s Department of the Environment when she found this out. “But,” she said, “my only vice at the time was … the Thinx underwear and I just didn’t want to know what was in it.” Forever chemicals, also known as per- and polyfluoroalkyl substances (PFAS), are a pervasive group of compounds that have been linked to a number of cancers and other illnesses. The toxic substances have become widespread in the air, soil and water via industrial discharge and are found in a number of common household items, from cookware to dental floss to stain-resistant furniture. And many of the products in which they have been detected — including waterproof makeup, workout leggings and period products — are primarily marketed toward women. Thinx denies that its products contain the substances, but settled a class-action lawsuit over allegations that they do last year. ‘Forever chemicals’ are pervasive. Here are 4 ways to avoid them in consumer products Found in ‘essential’ products Choy writes a column at Sierra Magazine, a publication of the environmental nonprofit Sierra Club. When a reader asked her to recommend the most eco-friendly period products, she started digging into the issue. Choy said she felt she couldn’t recommend the undergarments without finding out if her suspicions that they contained the toxic chemicals were correct.  She reached out to Graham Peaslee, a professor at the University of Notre Dame who was already well-known for discovering the presence of PFAS in fast food packaging.  Peaslee agreed to test the Thinx briefs and BTWN Shorty underwear for teens for her — she sent unused pairs— and found that they contained enough PFAS to suggest they were made with the substances on purpose. Thinx has continued to maintain that its products do not contain PFAS after Choy wrote about Peaslee’s findings.  In 2020, the company provided journalists with tests conducted by a different third party that did not find the substances in their product.  “Our product safety testing is conducted by third party facilities to ensure our products meet the robust European safety standards of REACH and OEKO-TEX,” then-Thinx CEO Maria Molland said in a statement at the time. “Based on this outside expert testing, PFAS chemicals were not detected in Thinx products.” Peaslee said that the day after Choy published the findings, Thinx also told him that its products didn’t contain PFAS. Thinx’s findings, he said, only looked for a subtype known as “long-chain PFAS,” whose chemical structure contains more carbon atoms. During his assessment, Peaslee said he found short-chain PFAS, which have fewer carbon atoms.  The scientist said he told the company as much. In response, he said they called him back the next day and asked him to tell the public their product was safe — an apparent attempt to blunt the negative publicity from an article that Choy wrote about his findings.  “They called me back and said, ‘Well, this thing’s getting out of hand, can you just issue a statement saying they're safe to wear?’” Peaslee said. “And I was like, ‘I’m sorry, did you not listen to a word I said yesterday? I wouldn’t put my damn daughter in these things.’” Allegations of PFAS in Thinx later spurred a class-action lawsuit claiming that the company “misrepresented the true nature of Thinx Underwear” by calling it free of harmful chemicals. The lawsuit was settled in 2023 for $5 million, enabling consumers to get back $7 per pair for every pair of Thinx underwear they purchased, up to three pairs. The company will also have to “take measures” aimed at making sure PFAS aren’t intentionally added to the underwear under the settlement. Nonetheless, Thinx still says its products are safe.  “We stand by the quality, safety and efficacy of our products. The lawsuit is related to how products were marketed and was not about injuries or harm caused by the products,” Thinx spokesperson Felicia Macdonald shared in a written statement with The Hill last year. Macdonald is no longer with Thinx. “We have resolved this matter so that we can focus our attention on doing what the brand does best — bringing innovative, safe and comfortable leak protection underwear to consumers,” she said.  Thinx declined to comment to The Hill on Peaslee’s account or say whether it had tested for short-chain PFAS. Peaslee is not the only scientist to have found PFAS in period underwear — and Thinx is not the only brand found to contain them. In May 2022, a team of researchers at the Massachusetts-based Silent Spring Institute published a study in Environmental Science & Technology looking at the presence of PFAS in underwear and several other consumer items. Among those products was menstrual underwear, which the scientists said they “selected because of presumed use by children or adolescents.” The companies marketing the menstrual underwear all promoted their products as leak-proof, per the study.  While analyzing six different period underwear products, however, the researchers directly identified the substances in one pair and found compounds that can react to become PFAS in that same pair and another.  Research released in August from Peaslee’s lab also found indicators of PFAS in some period products, including wrappers for several pads and some tampons and outer layers of menstrual underwear.   In a written statement accompanying the research, Peaslee noted that although “feminine products are essential,” putting PFAS in their layers or wrapping is not, since “plenty of them are made without relying on these compounds.” Ruthann Rudel, director of research at the Silent Spring Institute, said she thinks period underwear is helpful but that it’s worth advancing technologies that would rid these products of toxic chemicals. Worn close to the skin Menstrual underwear is far from the only product to contain PFAS that is geared mostly toward women.  The compounds are common ingredients in North American cosmetics — many of which may contain high levels of them. A 2021 study in Environmental Science & Technology Letters, co-authored by Peaslee, tested 231 makeup products and found that 63 percent of the foundations, 58 percent of the eye products, 55 percent of the lip products and 47 percent of the mascaras it looked at contained high levels of fluorine.  Researchers often test for fluorine to screen for the presence of PFAS, as the substances contain at least one fully fluorinated carbon atom — or four fluorines attached to one carbon. (The atom fluorine is different from the additive in toothpaste and water known as “fluoride,” which actually stands for sodium fluoride and is recognized by the Food and Drug Administration as a safe anti-cavity agent in small doses.)  After identifying the samples with the highest fluorine content, scientists sometimes then perform targeted analyses for PFAS compounds. In Peaslee’s 2021 cosmetics study, researchers performed targeted tests on 29 of the 231 samples and confirmed detectable levels of PFAS in all of them. Separately, the Environmental Working Group has identified 300 cosmetic products from 50 different popular brands that contain PFAS in its Skin Deep database. The advocacy organization found that 200 of these products contain PTFE, which is also used in Teflon pans.  PFAS are also allegedly found in a variety of workout wear from name brands using “a third-party EPA-certified laboratory,” according to a report published by consumer activist blog Mamavation in 2022 based on testing by “a third-party EPA-certified laboratory.”  Mamavation declined to name the lab on the record, but The Hill was able to verify its existence. The nonprofit site Environmental Health News and Mamavation identified PFAS in leggings and yoga pants as well. It's not entirely clear what impact wearing products containing the substances could have on the body. Linda Birnbaum, former head of the National Institute of Environmental Health Sciences and the National Toxicology Program, said PFAS “can be irritating on the skin at high concentrations,” but that she’s not aware of much research indicating they are altering skin.  Research on the impacts of absorption of PFAS through the skin is limited. However, one 2020 study on mice showed that a type of PFAS known as PFOA was harmful to the animals’ immune systems when it was exposed to their skin, similar to impacts of ingesting the substance — which is known to be hazardous.  Loreen Hackett, a longtime anti-PFAS activist from Hoosick Falls, N.Y., has been scrutinizing every product that enters or comes into contact with her body for years. “You got to look at leggings … and all this other shit. But we have to look more,” she said.  “Do [men] care if it's in their shaving cream? I don't know,” she continued. “But women use 10 times more personal care products than men. So of course it's going to affect us more.”  “How many guys do you see really lotioning their hands up?” Hackett asked. 

This is the first story in a series, "Fighting 'Forever Chemicals': Woman face pervasive PFAS risks." Jessian Choy had worn Thinx menstrual underwear for years before she learned they contained “forever chemicals.”  “I had always known that anything water, grease and stain resistant could have toxic PFAS chemicals in them because of my day job...

This is the first story in a series, "Fighting 'Forever Chemicals': Woman face pervasive PFAS risks."

Jessian Choy had worn Thinx menstrual underwear for years before she learned they contained “forever chemicals.” 

“I had always known that anything water, grease and stain resistant could have toxic PFAS chemicals in them because of my day job at the time,” said Choy, who was working in San Francisco’s Department of the Environment when she found this out.

“But,” she said, “my only vice at the time was … the Thinx underwear and I just didn’t want to know what was in it.”

Forever chemicals, also known as per- and polyfluoroalkyl substances (PFAS), are a pervasive group of compounds that have been linked to a number of cancers and other illnesses. The toxic substances have become widespread in the air, soil and water via industrial discharge and are found in a number of common household items, from cookware to dental floss to stain-resistant furniture.

And many of the products in which they have been detected — including waterproof makeup, workout leggings and period products — are primarily marketed toward women.

Thinx denies that its products contain the substances, but settled a class-action lawsuit over allegations that they do last year.

Found in ‘essential’ products

Choy writes a column at Sierra Magazine, a publication of the environmental nonprofit Sierra Club. When a reader asked her to recommend the most eco-friendly period products, she started digging into the issue.

Choy said she felt she couldn’t recommend the undergarments without finding out if her suspicions that they contained the toxic chemicals were correct. 

She reached out to Graham Peaslee, a professor at the University of Notre Dame who was already well-known for discovering the presence of PFAS in fast food packaging. 

Peaslee agreed to test the Thinx briefs and BTWN Shorty underwear for teens for her — she sent unused pairs— and found that they contained enough PFAS to suggest they were made with the substances on purpose. Thinx has continued to maintain that its products do not contain PFAS after Choy wrote about Peaslee’s findings

In 2020, the company provided journalists with tests conducted by a different third party that did not find the substances in their product. 

“Our product safety testing is conducted by third party facilities to ensure our products meet the robust European safety standards of REACH and OEKO-TEX,” then-Thinx CEO Maria Molland said in a statement at the time. “Based on this outside expert testing, PFAS chemicals were not detected in Thinx products.”

Peaslee said that the day after Choy published the findings, Thinx also told him that its products didn’t contain PFAS. Thinx’s findings, he said, only looked for a subtype known as “long-chain PFAS,” whose chemical structure contains more carbon atoms. During his assessment, Peaslee said he found short-chain PFAS, which have fewer carbon atoms. 

The scientist said he told the company as much. In response, he said they called him back the next day and asked him to tell the public their product was safe — an apparent attempt to blunt the negative publicity from an article that Choy wrote about his findings. 

“They called me back and said, ‘Well, this thing’s getting out of hand, can you just issue a statement saying they're safe to wear?’” Peaslee said. “And I was like, ‘I’m sorry, did you not listen to a word I said yesterday? I wouldn’t put my damn daughter in these things.’”

Allegations of PFAS in Thinx later spurred a class-action lawsuit claiming that the company “misrepresented the true nature of Thinx Underwear” by calling it free of harmful chemicals. The lawsuit was settled in 2023 for $5 million, enabling consumers to get back $7 per pair for every pair of Thinx underwear they purchased, up to three pairs. The company will also have to “take measures” aimed at making sure PFAS aren’t intentionally added to the underwear under the settlement. Nonetheless, Thinx still says its products are safe. 

“We stand by the quality, safety and efficacy of our products. The lawsuit is related to how products were marketed and was not about injuries or harm caused by the products,” Thinx spokesperson Felicia Macdonald shared in a written statement with The Hill last year. Macdonald is no longer with Thinx.

“We have resolved this matter so that we can focus our attention on doing what the brand does best — bringing innovative, safe and comfortable leak protection underwear to consumers,” she said. 

Thinx declined to comment to The Hill on Peaslee’s account or say whether it had tested for short-chain PFAS.

Peaslee is not the only scientist to have found PFAS in period underwear — and Thinx is not the only brand found to contain them. In May 2022, a team of researchers at the Massachusetts-based Silent Spring Institute published a study in Environmental Science & Technology looking at the presence of PFAS in underwear and several other consumer items.

Among those products was menstrual underwear, which the scientists said they “selected because of presumed use by children or adolescents.” The companies marketing the menstrual underwear all promoted their products as leak-proof, per the study. 

While analyzing six different period underwear products, however, the researchers directly identified the substances in one pair and found compounds that can react to become PFAS in that same pair and another. 

Research released in August from Peaslee’s lab also found indicators of PFAS in some period products, including wrappers for several pads and some tampons and outer layers of menstrual underwear.  

In a written statement accompanying the research, Peaslee noted that although “feminine products are essential,” putting PFAS in their layers or wrapping is not, since “plenty of them are made without relying on these compounds.”

Ruthann Rudel, director of research at the Silent Spring Institute, said she thinks period underwear is helpful but that it’s worth advancing technologies that would rid these products of toxic chemicals.

Worn close to the skin

Menstrual underwear is far from the only product to contain PFAS that is geared mostly toward women. 

The compounds are common ingredients in North American cosmetics — many of which may contain high levels of them. A 2021 study in Environmental Science & Technology Letters, co-authored by Peaslee, tested 231 makeup products and found that 63 percent of the foundations, 58 percent of the eye products, 55 percent of the lip products and 47 percent of the mascaras it looked at contained high levels of fluorine. 

Researchers often test for fluorine to screen for the presence of PFAS, as the substances contain at least one fully fluorinated carbon atom — or four fluorines attached to one carbon. (The atom fluorine is different from the additive in toothpaste and water known as “fluoride,” which actually stands for sodium fluoride and is recognized by the Food and Drug Administration as a safe anti-cavity agent in small doses.) 

After identifying the samples with the highest fluorine content, scientists sometimes then perform targeted analyses for PFAS compounds. In Peaslee’s 2021 cosmetics study, researchers performed targeted tests on 29 of the 231 samples and confirmed detectable levels of PFAS in all of them.

Separately, the Environmental Working Group has identified 300 cosmetic products from 50 different popular brands that contain PFAS in its Skin Deep database. The advocacy organization found that 200 of these products contain PTFE, which is also used in Teflon pans. 

PFAS are also allegedly found in a variety of workout wear from name brands using “a third-party EPA-certified laboratory,” according to a report published by consumer activist blog Mamavation in 2022 based on testing by “a third-party EPA-certified laboratory.”  Mamavation declined to name the lab on the record, but The Hill was able to verify its existence.

The nonprofit site Environmental Health News and Mamavation identified PFAS in leggings and yoga pants as well.

It's not entirely clear what impact wearing products containing the substances could have on the body. Linda Birnbaum, former head of the National Institute of Environmental Health Sciences and the National Toxicology Program, said PFAS “can be irritating on the skin at high concentrations,” but that she’s not aware of much research indicating they are altering skin. 

Research on the impacts of absorption of PFAS through the skin is limited. However, one 2020 study on mice showed that a type of PFAS known as PFOA was harmful to the animals’ immune systems when it was exposed to their skin, similar to impacts of ingesting the substance — which is known to be hazardous. 

Loreen Hackett, a longtime anti-PFAS activist from Hoosick Falls, N.Y., has been scrutinizing every product that enters or comes into contact with her body for years.

“You got to look at leggings … and all this other shit. But we have to look more,” she said. 

“Do [men] care if it's in their shaving cream? I don't know,” she continued. “But women use 10 times more personal care products than men. So of course it's going to affect us more.” 

“How many guys do you see really lotioning their hands up?” Hackett asked. 

Read the full story here.
Photos courtesy of

Like Many Holiday Traditions, Lighting Candles and Fireplaces Is Best Done in Moderation

The warm scents of gingerbread and pine are holiday favorites, but experts warn they can affect indoor air quality

The warm spices in gingerbread, the woodsy aroma of pine and fir trees, and the fruity tang of mulled wine are smells synonymous with the holiday season. Many people enjoy lighting candles, incense and fireplaces in their homes to evoke the moods associated with these festive fragrances.Burning scented products may create a cozy ambiance, and in the case of fireplaces, provide light and heat, but some experts want people to consider how doing so contributes to the quality of the air indoors. All flames release chemicals that may cause allergy-like symptoms or contribute to long-term respiratory problems if they are inhaled in sufficient quantities.However, people don't have to stop sitting by the hearth or get rid of products like perfumed candles and essential oil diffusers, said Dr. Meredith McCormack, director of the pulmonary and critical care medicine division at John Hopkins University’s medical school. Instead, she recommends taking precautions to control the pollutants in their homes.“Clean air is fragrance free,” said McCormack, who has studied air quality and lung health for more than 20 years. “If having seasonal scents is part of your tradition or evokes feelings of nostalgia, maybe think about it in moderation.” What to know about indoor air quality People in the Northern Hemisphere tend to spend more time indoors during the end-of-year holidays, when temperatures are colder. Indoor air can be significantly more polluted than outdoor air because pollutants get trapped inside and concentrated without proper ventilation or filtration, according to the American Lung Association.For example, active fireplaces and gas appliances release tiny airborne particles that can get into the lungs and chemicals like nitrogen dioxide, a major component of smog, according to the U.S. Environmental Protection Agency. Cleaning products, air fresheners and candles also emit air pollutants at varying concentrations.The risk fragrances and other air pollutants may pose to respiratory health depends on the source, the length and intensity of a person’s exposure, and individual health, McCormack said.It is also important to note that some pollutants have no smell, so unscented products still can affect indoor air quality, experts say. Some people are more vulnerable Polluted air affects everyone but not equally. Children, older adults, minority populations and people of low socioeconomic status are more likely to be affected by poor air quality because of either physiological vulnerabilities or higher exposure, according to the environmental agency.Children are more susceptible to air pollution because of their lung size, which means they get a greater dose of exposure relative to their body size, McCormack said. Pollutants inside the home also post a greater hazard to people with heart or lung conditions, including asthma, she said.Signs of respiratory irritation include coughing, shortness of breath, headaches, a runny nose and sneezing. Experts advise stopping use of pollutant-releasing products or immediately ventilating rooms if symptoms occur.“The more risk factors you have, the more harmful air pollution or poor air quality indoors can be,” McCormack said. Practical precautions to take Ellen Wilkowe burns candles with scents like vanilla and cinnamon when she does yoga, writes or when she is showering at her home in New Jersey. Her teenage daughter, on the other hand, likes more seasonally scented candles like gingerbread.“The candle has a calming presence. They are also very symbolic and used in rituals and many religions,” she said.Wilkowe said she leans toward candles made with soy-based waxes instead of petroleum-based paraffin. Experts note that all lit candles give off air pollutants regardless of what they are made of.Buying products with fewer ingredients, opening windows if the temperatures allow, and using air purifiers with HEPA filters are ways to reduce exposure to any pollutants from indoor fireplaces, appliances and candle displays, McCormack said. She also recommends switching on kitchen exhaust fans before starting a gas-powered stovetop and using the back burners so the vent can more easily suck up pollutants.Setting polite boundaries with guests who smoke cigarettes or other tobacco products is also a good idea, she said.“Small improvements in air quality can have measurable health benefits," McCormack said. "Similarly to if we exercise and eat a little better, we can be healthier.”Rachael Lewis-Abbott, a member of the Indoor Air Quality Association, an organization for professionals who identify and address air quality problems, said people don't usually notice what they are breathing in until problems like gas leaks or mold develop.“It is out of sight, out of mind,” she said.Copyright 2025 The Associated Press. All rights reserved. This material may not be published, broadcast, rewritten or redistributed.Photos You Should See – December 2025

This moss survived in space for 9 months

In an experiment on the outside of the International Space Station, a species of moss survived in space for 9 months. And it could have lasted much longer. The post This moss survived in space for 9 months first appeared on EarthSky.

Meet a spreading earthmoss known as Physcomitrella patens. It’s frequently used as a model organism for studies on plant evolution, development, and physiology. In this image, a reddish-brown sporophyte sits at the top center of a leafy gametophore. This capsule contains numerous spores inside. Scientists tested samples like these on the outside of the International Space Station (ISS) to see if they could tolerate the extreme airless environment. And they did. The moss survived in space for 9 months and could have lasted even longer. Image via Tomomichi Fujita/ EurekAlert! (CC BY-SA). Space is a deadly environment, with no air, extreme temperature swings and harsh radiation. Could any life survive there? Reasearchers in Japan tested a type of moss called spreading earthmoss on the exterior of the International Space Station. The moss survived for nine months, and the spores were still able to reproduce when brought back to Earth. Moss survived in space for 9 months Can life exist in space? Not simply on other planets or moons, but in the cold, dark, airless void of space itself? Most organisms would perish almost immediately, to be sure. But researchers in Japan recently experimented with moss, with surprising results. They said on November 20, 2025, that more than 80% of their moss spores survived nine months on the outside of the International Space Station. Not only that, but when brought back to Earth, they were still capable of reproducing. Nature, it seems, is even tougher than we thought! Amazingly, the results show that some primitive plants – not even just microorganisms – can survive long-term exposure to the extreme space environment. The researchers published their peer-reviewed findings in the journal iScience on November 20, 2025. A deadly environment for life Space is a horrible place for life. The lack of air, radiation and extreme cold make it pretty much unsurvivable for life as we know it. As lead author Tomomichi Fujita at Hokkaido University in Japan stated: Most living organisms, including humans, cannot survive even briefly in the vacuum of space. However, the moss spores retained their vitality after nine months of direct exposure. This provides striking evidence that the life that has evolved on Earth possesses, at the cellular level, intrinsic mechanisms to endure the conditions of space. This #moss survived 9 months directly exposed to the vacuum space and could still reproduce after returning to Earth. ? ? spkl.io/63322AdFrpTomomichi Fujita & colleagues@cp-iscience.bsky.social — Cell Press (@cellpress.bsky.social) 2025-11-24T16:00:02.992Z What about moss? Researchers wanted to see if any Earthly life could survive in space’s deadly environment for the long term. To find out, they decided to do some experiments with a type of moss called spreading earthmoss, or Physcomitrium patens. The researchers sent hundreds of sporophytes – encapsulated moss spores – to the International Space Station in March 2022, aboard the Cygnus NG-17 spacecraft. They attached the sporophyte samples to the outside of the ISS, where they were exposed to the vacuum of space for 283 days. By doing so, the samples were subjected to high levels of UV (ultraviolet) radiation and extreme swings of temperature. The samples later returned to Earth in January 2023. The researchers tested three parts of the moss. These were the protonemata, or juvenile moss; brood cells, or specialized stem cells that emerge under stress conditions; and the sporophytes. Fujita said: We anticipated that the combined stresses of space, including vacuum, cosmic radiation, extreme temperature fluctuations and microgravity, would cause far greater damage than any single stress alone. Astronauts placed the moss samples on the outside of the International Space Station for the 9-month-long experiment. Incredibly, more than 80% of the the encapsulated spores survived the trip to space and back to Earth. Image via NASA/ Roscosmos. The moss survived! So, how did the moss do? The results were mixed, but overall showed that the moss could survive in space. The radiation was the most difficult aspect of the space environment to withstand. The sporophytes were the most resilient. Incredibly, they were able to survive and germinate after being exposed to -196 degrees Celsius (-320 degrees Fahrenheit) for more than a week. At the other extreme, they also survived in 55° degrees C (131 degrees F) heat for a month. Some brood cells survived as well, but the encased spores were about 1,000 times more tolerant to the UV radiation. On the other hand, none of the juvenile moss survived the high UV levels or the extreme temperatures. Samples of moss spores that germinated after their 9-month exposure to space. Image via Dr. Chang-hyun Maeng/ Maika Kobayashi/ EurekAlert!. (CC BY-SA). How did the spores survive? So why did the encapsulated spores do so well? The researchers said the natural structure surrounding the spore itself helps to protect the spore. Essentially, it absorbs the UV radiation and surrounds the inner spore both physically and chemically to prevent damage. As it turns out, this might be associated with the evolution of mosses. This is an adaptation that helped bryophytes – the group of plants to which mosses belong – to make the transition from aquatic to terrestrial plants 500 million years ago. Overall, more than 80% of the spores survived the journey to space and then back to Earth. And only 11% were unable to germinate after being brought back to the lab on Earth. That’s impressive! In addition, the researchers also tested the levels of chlorophyll in the spores. After the exposure to space, the spores still had normal amounts of chlorophyll, except for chlorophyll a specifically. In that case, there was a 20% reduction. Chlorophyll a is used in oxygenic photosynthesis. It absorbs the most energy from wavelengths of violet-blue and orange-red light. Tomomichi Fujita at Hokkaido University in Japan is the lead author of the new study about moss in space. Image via Hokkaido University. Spores could have survived for 15 years The time available for the experiment was limited to the several months. However, the researchers wondered if the moss spores could have survived even longer. And using mathematical models, they determined the spores would likely have continued to live in space for about 15 years, or 5,600 days, altogether. The researchers note this prediction is a rough estimate. More data would still be needed to make that assessment even more accurate. So the results show just how resilient moss is, and perhaps some other kinds of life, too. Fujita said: This study demonstrates the astonishing resilience of life that originated on Earth. Ultimately, we hope this work opens a new frontier toward constructing ecosystems in extraterrestrial environments such as the moon and Mars. I hope that our moss research will serve as a starting point. Bottom line: In an experiment on the outside of the International Space Station, a species of moss survived in space for nine months. And it could have lasted much longer. Source: Extreme environmental tolerance and space survivability of the moss, Physcomitrium patens Via EurekAlert! Read more: This desert moss could grow on Mars, no greenhouse needed Read more: Colorful life on exoplanets might be lurking in cloudsThe post This moss survived in space for 9 months first appeared on EarthSky.

Medical Imaging Contributing To Water Pollution, Experts Say

By Dennis Thompson HealthDay ReporterTHURSDAY, Dec. 11, 2025 (HealthDay News) — Contrast chemicals injected into people for medical imaging scans...

By Dennis Thompson HealthDay ReporterTHURSDAY, Dec. 11, 2025 (HealthDay News) — Contrast chemicals injected into people for medical imaging scans are likely contributing to water pollution, a new study says.Medicare patients alone received 13.5 billion milliliters of contrast media between 2011 and 2024, and those chemicals wound up in waterways after people excreted them, researchers recently reported in JAMA Network Open.“Contrast agents are necessary for effective imaging, but they don’t disappear after use,” said lead researcher Dr. Florence Doo, an assistant professor at the University of Maryland Medical Intelligent Imaging Center in Baltimore.“Iodine and gadolinium are non-renewable resources that can enter wastewater and accumulate in rivers, oceans and even drinking water,” Doo said in a news release.People undergoing X-ray or CT scans are sometimes given iodine or barium-sulfate compounds that cause certain tissues, blood vessels or organs to light up, allowing radiologists a better look at potential health problems.For MRI scans, radiologists use gadolinium, a substance that alters the magnetic properties of water molecules in the human body.These are critical for diagnosing disease, but they are also persistent pollutants, researchers said in background notes. They aren’t biodegradable, and conventional wastewater treatment doesn’t fully remove them.For the new study, researchers analyzed 169 million contrast-enhanced imaging procedures that Medicare covered over 13 years.Iodine-based contrast agents accounted for more than 95% of the total volume, or nearly 12.9 billion milliliters. Of those, agents used in CT scans of the abdomen and pelvis alone contributed 4.4 billion milliliters.Gadolinium agents were less frequently used, but still contributed nearly 600 million milliliters, researchers said. Brain MRIs were the most common scan using these contrast materials.Overall, just a handful of procedures accounted for 80% of all contrast use, researchers concluded.“Our study shows that a small number of imaging procedures drive the majority of contrast use. Focusing on those highest-use imaging types make meaningful changes tractable and could significantly reduce health care’s environmental footprint,” researcher Elizabeth Rula, executive director of the Harvey L. Neiman Health Policy Institute in Reston, Va., said in a news release.Doctors can help by making sure their imaging orders are necessary, while radiologists can lower the doses of contrast agents by basing them on a patient’s weight, researchers said.Biodegradable contrast media are under development, researchers noted. Another solution could involve AI, which might be able to accurately analyze medical imaging scans even if less contrast media is used.“We can’t ignore the environmental consequences of medical imaging,” Doo said. “Stewardship of contrast agents is a measurable and impactful way to align patient care with planetary health and should be an important part of broader health care sustainability efforts.”SOURCES: Harvey L. Neiman Health Policy Institute, news release, Dec. 4, 2025; JAMA Network Open, Dec. 5, 2025Copyright © 2025 HealthDay. All rights reserved.

Cars to AI: How new tech drives demand for specialized materials

Generative artificial intelligence has become widely accepted as a tool that increases productivity. Yet the technology is far from mature. Large language models advance rapidly from one generation to the next, and experts can only speculate how AI will affect the workforce and people’s daily lives. As a materials scientist, I am interested in how materials and the technologies that derive from them affect society. AI is one example of a technology driving global change—particularly through its demand for materials and rare minerals. But before AI evolved to its current level, two other technologies exemplified the process created by the demand for specialized materials: cars and smartphones. Often, the mass adoption of a new invention changes human behavior, which leads to new technologies and infrastructures reliant upon the invention. In turn, these new technologies and infrastructures require new or improved materials—and these often contain critical minerals: those minerals that are both essential to the technology and strain the supply chain. The unequal distribution of these minerals gives leverage to the nations that produce them. The resulting power shifts strain geopolitical relations and drive the search for new mineral sources. New technology nurtures the mining industry. The car and the development of suburbs At the beginning of the 20th century, only 5 out of 1,000 people owned a car, with annual production around a few thousand. Workers commuted on foot or by tram. Within a 2-mile radius, many people had all they needed: from groceries to hardware, from school to church, and from shoemakers to doctors. Then, in 1913, Henry Ford transformed the industry by inventing the assembly line. Now, a middle class family could afford a car: Mass production cut the price of the Model T from US$850 in 1908 to $360 in 1916. While the Great Depression dampened the broad adoption of the car, sales began to increase again after the end of World War II. With cars came more mobility, and many people moved farther away from work. In the 1940s and 1950s, a powerful highway lobby that included oil, automobile, and construction interests promoted federal highway and transportation policies, which increased automobile dependence. These policies helped change the landscape: Houses were spaced farther apart, and located farther away from the urban centers where many people worked. By the 1960s, two-thirds of American workers commuted by car, and the average commute had increased to 10 miles. Public policy and investment favored suburbs, which meant less investment in city centers. The resulting decay made living in downtown areas of many cities undesirable and triggered urban renewal projects. Long commutes added to pollution and expenses, which created a demand for lighter, more fuel-efficient cars. But building these required better materials. In 1970, the entire frame and body of a car was made from one steel type, but by 2017, 10 different, highly specialized steels constituted a vehicle’s lightweight form. Each steel contains different chemical elements, such as molybdenum and vanadium, which are mined only in a few countries. While the car supply chain was mostly domestic until the 1970s, the car industry today relies heavily on imports. This dependence has created tension with international trade partners, as reflected by higher tariffs on steel. The cellphone and American life The cellphone presents another example of a technology creating a demand for minerals and affecting foreign policy. In 1983, Motorola released the DynaTAC, the first commercial cellular phone. It was heavy, expensive, and its battery lasted for only half an hour, so few people had one. Then in 1996, Motorola introduced the flip phone, which was cheaper, lighter, and more convenient to use. The flip phone initiated the mass adoption of cellphones. However, it was still just a phone: Unlike today’s smartphones, all it did was send and receive calls and texts. In 2007, Apple redefined communication with the iPhone, inventing the touchscreen and integrating an internet navigator. The phone became a digital hub for navigating, finding information, and building an online social identity. Before smartphones, mobile phones supplemented daily life. Now, they structure it. In 2000, fewer than half of American adults owned a cellphone, and nearly all who did used it only sporadically. In 2024, 98% of Americans over the age of 18 reported owning a cellphone, and over 90% owned a smartphone. Without the smartphone, most people cannot fulfill their daily tasks. Many individuals now experience nomophobia: They feel anxious without a cellphone. Around three-quarters of all stable elements are represented in the components of each smartphone. These elements are necessary for highly specialized materials that enable touchscreens, displays, batteries, speakers, microphones, and cameras. Many of these elements are essential for at least one function and have an unreliable supply chain, which makes them critical. Critical materials and AI Critical materials give leverage to countries that have a monopoly in mining and processing them. For example, China has gained increased power through its monopoly on rare earth elements. In April 2025, in response to U.S. tariffs, China stopped exporting rare earth magnets, which are used in cellphones. The geopolitical tensions that resulted demonstrate the power embodied in the control over critical minerals. The mass adoption of AI technology will likely change human behavior and bring forth new technologies, industries, and infrastructure on which the U.S. economy will depend. All of these technologies will require more optimized and specialized materials and create new material dependencies. By exacerbating material dependencies, AI could affect geopolitical relations and reorganize global power. America has rich deposits of many important minerals, but extraction of these minerals comes with challenges. Factors including slow and costly permitting, public opposition, environmental concerns, high investment costs, and an inadequate workforce all can prevent mining companies from accessing these resources. The mass adoption of AI is already adding pressure to overcome these factors and to increase responsible domestic mining. While the path from innovation to material dependence spanned a century for cars and a couple of decades for cellphones, the rapid advancement of large language models suggests that the scale will be measured in years for AI. The heat is already on. Peter Müllner is a distinguished professor in materials science and engineering at Boise State University. This article is republished from The Conversation under a Creative Commons license. Read the original article.

Generative artificial intelligence has become widely accepted as a tool that increases productivity. Yet the technology is far from mature. Large language models advance rapidly from one generation to the next, and experts can only speculate how AI will affect the workforce and people’s daily lives. As a materials scientist, I am interested in how materials and the technologies that derive from them affect society. AI is one example of a technology driving global change—particularly through its demand for materials and rare minerals. But before AI evolved to its current level, two other technologies exemplified the process created by the demand for specialized materials: cars and smartphones. Often, the mass adoption of a new invention changes human behavior, which leads to new technologies and infrastructures reliant upon the invention. In turn, these new technologies and infrastructures require new or improved materials—and these often contain critical minerals: those minerals that are both essential to the technology and strain the supply chain. The unequal distribution of these minerals gives leverage to the nations that produce them. The resulting power shifts strain geopolitical relations and drive the search for new mineral sources. New technology nurtures the mining industry. The car and the development of suburbs At the beginning of the 20th century, only 5 out of 1,000 people owned a car, with annual production around a few thousand. Workers commuted on foot or by tram. Within a 2-mile radius, many people had all they needed: from groceries to hardware, from school to church, and from shoemakers to doctors. Then, in 1913, Henry Ford transformed the industry by inventing the assembly line. Now, a middle class family could afford a car: Mass production cut the price of the Model T from US$850 in 1908 to $360 in 1916. While the Great Depression dampened the broad adoption of the car, sales began to increase again after the end of World War II. With cars came more mobility, and many people moved farther away from work. In the 1940s and 1950s, a powerful highway lobby that included oil, automobile, and construction interests promoted federal highway and transportation policies, which increased automobile dependence. These policies helped change the landscape: Houses were spaced farther apart, and located farther away from the urban centers where many people worked. By the 1960s, two-thirds of American workers commuted by car, and the average commute had increased to 10 miles. Public policy and investment favored suburbs, which meant less investment in city centers. The resulting decay made living in downtown areas of many cities undesirable and triggered urban renewal projects. Long commutes added to pollution and expenses, which created a demand for lighter, more fuel-efficient cars. But building these required better materials. In 1970, the entire frame and body of a car was made from one steel type, but by 2017, 10 different, highly specialized steels constituted a vehicle’s lightweight form. Each steel contains different chemical elements, such as molybdenum and vanadium, which are mined only in a few countries. While the car supply chain was mostly domestic until the 1970s, the car industry today relies heavily on imports. This dependence has created tension with international trade partners, as reflected by higher tariffs on steel. The cellphone and American life The cellphone presents another example of a technology creating a demand for minerals and affecting foreign policy. In 1983, Motorola released the DynaTAC, the first commercial cellular phone. It was heavy, expensive, and its battery lasted for only half an hour, so few people had one. Then in 1996, Motorola introduced the flip phone, which was cheaper, lighter, and more convenient to use. The flip phone initiated the mass adoption of cellphones. However, it was still just a phone: Unlike today’s smartphones, all it did was send and receive calls and texts. In 2007, Apple redefined communication with the iPhone, inventing the touchscreen and integrating an internet navigator. The phone became a digital hub for navigating, finding information, and building an online social identity. Before smartphones, mobile phones supplemented daily life. Now, they structure it. In 2000, fewer than half of American adults owned a cellphone, and nearly all who did used it only sporadically. In 2024, 98% of Americans over the age of 18 reported owning a cellphone, and over 90% owned a smartphone. Without the smartphone, most people cannot fulfill their daily tasks. Many individuals now experience nomophobia: They feel anxious without a cellphone. Around three-quarters of all stable elements are represented in the components of each smartphone. These elements are necessary for highly specialized materials that enable touchscreens, displays, batteries, speakers, microphones, and cameras. Many of these elements are essential for at least one function and have an unreliable supply chain, which makes them critical. Critical materials and AI Critical materials give leverage to countries that have a monopoly in mining and processing them. For example, China has gained increased power through its monopoly on rare earth elements. In April 2025, in response to U.S. tariffs, China stopped exporting rare earth magnets, which are used in cellphones. The geopolitical tensions that resulted demonstrate the power embodied in the control over critical minerals. The mass adoption of AI technology will likely change human behavior and bring forth new technologies, industries, and infrastructure on which the U.S. economy will depend. All of these technologies will require more optimized and specialized materials and create new material dependencies. By exacerbating material dependencies, AI could affect geopolitical relations and reorganize global power. America has rich deposits of many important minerals, but extraction of these minerals comes with challenges. Factors including slow and costly permitting, public opposition, environmental concerns, high investment costs, and an inadequate workforce all can prevent mining companies from accessing these resources. The mass adoption of AI is already adding pressure to overcome these factors and to increase responsible domestic mining. While the path from innovation to material dependence spanned a century for cars and a couple of decades for cellphones, the rapid advancement of large language models suggests that the scale will be measured in years for AI. The heat is already on. Peter Müllner is a distinguished professor in materials science and engineering at Boise State University. This article is republished from The Conversation under a Creative Commons license. Read the original article.

Suggested Viewing

Join us to forge
a sustainable future

Our team is always growing.
Become a partner, volunteer, sponsor, or intern today.
Let us know how you would like to get involved!

CONTACT US

sign up for our mailing list to stay informed on the latest films and environmental headlines.

Subscribers receive a free day pass for streaming Cinema Verde.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.