From nanoscale to global scale: Advancing MIT’s special initiatives in manufacturing, health, and climate
“MIT.nano is essential to making progress in high-priority areas where I believe that MIT has a responsibility to lead,” opened MIT president Sally Kornbluth at the 2025 Nano Summit. “If we harness our collective efforts, we can make a serious positive impact.”It was these collective efforts that drove discussions at the daylong event hosted by MIT.nano and focused on the importance of nanoscience and nanotechnology across MIT's special initiatives — projects deemed critical to MIT’s mission to help solve the world’s greatest challenges. With each new talk, common themes were reemphasized: collaboration across fields, solutions that can scale up from lab to market, and the use of nanoscale science to enact grand-scale change.“MIT.nano has truly set itself apart, in the Institute's signature way, with an emphasis on cross-disciplinary collaboration and open access,” said Kornbluth. “Today, you're going to hear about the transformative impact of nanoscience and nanotechnology, and how working with the very small can help us do big things for the world together.”Collaborating on healthAngela Koehler, faculty director of the MIT Health and Life Sciences Collaborative (MIT HEALS) and the Charles W. and Jennifer C. Johnson Professor of Biological Engineering, opened the first session with a question: How can we build a community across campus to tackle some of the most transformative problems in human health? In response, three speakers shared their work enabling new frontiers in medicine.Ana Jaklenec, principal research scientist at the Koch Institute for Integrative Cancer Research, spoke about single-injection vaccines, and how her team looked to the techniques used in fabrication of electrical engineering components to see how multiple pieces could be packaged into a tiny device. “MIT.nano was instrumental in helping us develop this technology,” she said. “We took something that you can do in microelectronics and the semiconductor industry and brought it to the pharmaceutical industry.”While Jaklenec applied insight from electronics to her work in health care, Giovanni Traverso, the Karl Van Tassel Career Development Professor of Mechanical Engineering, who is also a gastroenterologist at Brigham and Women’s Hospital, found inspiration in nature, studying the cephalopod squid and remora fish to design ingestible drug delivery systems. Representing the industry side of life sciences, Mirai Bio senior vice president Jagesh Shah SM ’95, PhD ’99 presented his company’s precision-targeted lipid nanoparticles for therapeutic delivery. Shah, as well as the other speakers, emphasized the importance of collaboration between industry and academia to make meaningful impact, and the need to strengthen the pipeline for young scientists.Manufacturing, from the classroom to the workforcePaving the way for future generations was similarly emphasized in the second session, which highlighted MIT’s Initiative for New Manufacturing (MIT INM). “MIT’s dedication to manufacturing is not only about technology research and education, it’s also about understanding the landscape of manufacturing, domestically and globally,” said INM co-director A. John Hart, the Class of 1922 Professor and head of the Department of Mechanical Engineering. “It’s about getting people — our graduates who are budding enthusiasts of manufacturing — out of campus and starting and scaling new companies,” he said.On progressing from lab to market, Dan Oran PhD ’21 shared his career trajectory from technician to PhD student to founding his own company, Irradiant Technologies. “How are companies like Dan’s making the move from the lab to prototype to pilot production to demonstration to commercialization?” asked the next speaker, Elisabeth Reynolds, professor of the practice in urban studies and planning at MIT. “The U.S. capital market has not historically been well organized for that kind of support.” She emphasized the challenge of scaling innovations from prototype to production, and the need for workforce development.“Attracting and retaining workforce is a major pain point for manufacturing businesses,” agreed John Liu, principal research scientist in mechanical engineering at MIT. To keep new ideas flowing from the classroom to the factory floor, Liu proposes a new worker type in advanced manufacturing — the technologist — someone who can be a bridge to connect the technicians and the engineers.Bridging ecosystems with nanoscienceBridging people, disciplines, and markets to affect meaningful change was also emphasized by Benedetto Marelli, mission director for the MIT Climate Project and associate professor of civil and environmental engineering at MIT.“If we’re going to have a tangible impact on the trajectory of climate change in the next 10 years, we cannot do it alone,” he said. “We need to take care of ecology, health, mobility, the built environment, food, energy, policies, and trade and industry — and think about these as interconnected topics.”Faculty speakers in this session offered a glimpse of nanoscale solutions for climate resiliency. Michael Strano, the Carbon P. Dubbs Professor of Chemical Engineering, presented his group’s work on using nanoparticles to turn waste methane and urea into renewable materials. Desirée Plata, the School of Engineering Distinguished Climate and Energy Professor, spoke about scaling carbon dioxide removal systems. Mechanical engineering professor Kripa Varanasi highlighted, among other projects, his lab’s work on improving agricultural spraying so pesticides adhere to crops, reducing agricultural pollution and cost.In all of these presentations, the MIT faculty highlighted the tie between climate and the economy. “The economic systems that we have today are depleting to our resources, inherently polluting,” emphasized Plata. “The goal here is to use sustainable design to transition the global economy.”What do people do at MIT.nano?This is where MIT.nano comes in, offering shared access facilities where researchers can design creative solutions to these global challenges. “What do people do at MIT.nano?” asked associate director for Fab.nano Jorg Scholvin ’00, MNG ’01, PhD ’06 in the session on MIT.nano’s ecosystem. With 1,500 individuals and over 20 percent of MIT faculty labs using MIT.nano, it’s a difficult question to quickly answer. However, in a rapid-fire research showcase, students and postdocs gave a response that spanned 3D transistors and quantum devices to solar solutions and art restoration. Their work reflects the challenges and opportunities shared at the Nano Summit: developing technologies ready to scale, uniting disciplines to tackle complex problems, and gaining hands-on experience that prepares them to contribute to the future of hard tech.The researchers’ enthusiasm carried the excitement and curiosity that President Kornbluth mentioned in her opening remarks, and that many faculty emphasized throughout the day. “The solutions to the problems we heard about today may come from inventions that don't exist yet,” said Strano. “These are some of the most creative people, here at MIT. I think we inspire each other.”Robert N. Noyce (1953) Cleanroom at MIT.nanoCollaborative inspiration is not new to the MIT culture. The Nano Summit sessions focused on where we are today, and where we might be going in the future, but also reflected on how we arrived at this moment. Honoring visionaries of nanoscience and nanotechnology, President Emeritus L. Rafael Reif delivered the closing remarks and an exciting announcement — the dedication of the MIT.nano cleanroom complex. Made possible through a gift by Ray Stata SB ’57, SM ’58, this research space, 45,000 square feet of ISO 5, 6, and 7 cleanrooms, will be named the Robert N. Noyce (1953) Cleanroom.“Ray Stata was — and is — the driving force behind nanoscale research at MIT,” said Reif. “I want to thank Ray, whose generosity has allowed MIT to honor Robert Noyce in such a fitting way.”Ray Stata co-founded Analog Devices in 1965, and Noyce co-founded Fairchild Semiconductor in 1957, and later Intel in 1968. Noyce, widely regarded as the “Mayor of Silicon Valley,” became chair of the Semiconductor Industry Association in 1977, and over the next 40 years, semiconductor technology advanced a thousandfold, from micrometers to nanometers.“Noyce was a pioneer of the semiconductor industry,” said Stata. “It is due to his leadership and remarkable contributions that electronics technology is where it is today. It is an honor to be able to name the MIT.nano cleanroom after Bob Noyce, creating a permanent tribute to his vision and accomplishments in the heart of the MIT campus.”To conclude his remarks and the 2025 Nano Summit, Reif brought the nano journey back to today, highlighting technology giants such as Lisa Su ’90, SM ’91, PhD ’94, for whom Building 12, the home of MIT.nano, is named. “MIT has educated a large number of remarkable leaders in the semiconductor space,” said Reif. “Now, with the Robert Noyce Cleanroom, this amazing MIT community is ready to continue to shape the future with the next generation of nano discoveries — and the next generation of nano leaders, who will become living legends in their own time.”
MIT.nano cleanroom complex named after Robert Noyce PhD ’53 at the 2025 Nano Summit.
“MIT.nano is essential to making progress in high-priority areas where I believe that MIT has a responsibility to lead,” opened MIT president Sally Kornbluth at the 2025 Nano Summit. “If we harness our collective efforts, we can make a serious positive impact.”
It was these collective efforts that drove discussions at the daylong event hosted by MIT.nano and focused on the importance of nanoscience and nanotechnology across MIT's special initiatives — projects deemed critical to MIT’s mission to help solve the world’s greatest challenges. With each new talk, common themes were reemphasized: collaboration across fields, solutions that can scale up from lab to market, and the use of nanoscale science to enact grand-scale change.
“MIT.nano has truly set itself apart, in the Institute's signature way, with an emphasis on cross-disciplinary collaboration and open access,” said Kornbluth. “Today, you're going to hear about the transformative impact of nanoscience and nanotechnology, and how working with the very small can help us do big things for the world together.”
Collaborating on health
Angela Koehler, faculty director of the MIT Health and Life Sciences Collaborative (MIT HEALS) and the Charles W. and Jennifer C. Johnson Professor of Biological Engineering, opened the first session with a question: How can we build a community across campus to tackle some of the most transformative problems in human health? In response, three speakers shared their work enabling new frontiers in medicine.
Ana Jaklenec, principal research scientist at the Koch Institute for Integrative Cancer Research, spoke about single-injection vaccines, and how her team looked to the techniques used in fabrication of electrical engineering components to see how multiple pieces could be packaged into a tiny device. “MIT.nano was instrumental in helping us develop this technology,” she said. “We took something that you can do in microelectronics and the semiconductor industry and brought it to the pharmaceutical industry.”
While Jaklenec applied insight from electronics to her work in health care, Giovanni Traverso, the Karl Van Tassel Career Development Professor of Mechanical Engineering, who is also a gastroenterologist at Brigham and Women’s Hospital, found inspiration in nature, studying the cephalopod squid and remora fish to design ingestible drug delivery systems. Representing the industry side of life sciences, Mirai Bio senior vice president Jagesh Shah SM ’95, PhD ’99 presented his company’s precision-targeted lipid nanoparticles for therapeutic delivery. Shah, as well as the other speakers, emphasized the importance of collaboration between industry and academia to make meaningful impact, and the need to strengthen the pipeline for young scientists.
Manufacturing, from the classroom to the workforce
Paving the way for future generations was similarly emphasized in the second session, which highlighted MIT’s Initiative for New Manufacturing (MIT INM). “MIT’s dedication to manufacturing is not only about technology research and education, it’s also about understanding the landscape of manufacturing, domestically and globally,” said INM co-director A. John Hart, the Class of 1922 Professor and head of the Department of Mechanical Engineering. “It’s about getting people — our graduates who are budding enthusiasts of manufacturing — out of campus and starting and scaling new companies,” he said.
On progressing from lab to market, Dan Oran PhD ’21 shared his career trajectory from technician to PhD student to founding his own company, Irradiant Technologies. “How are companies like Dan’s making the move from the lab to prototype to pilot production to demonstration to commercialization?” asked the next speaker, Elisabeth Reynolds, professor of the practice in urban studies and planning at MIT. “The U.S. capital market has not historically been well organized for that kind of support.” She emphasized the challenge of scaling innovations from prototype to production, and the need for workforce development.
“Attracting and retaining workforce is a major pain point for manufacturing businesses,” agreed John Liu, principal research scientist in mechanical engineering at MIT. To keep new ideas flowing from the classroom to the factory floor, Liu proposes a new worker type in advanced manufacturing — the technologist — someone who can be a bridge to connect the technicians and the engineers.
Bridging ecosystems with nanoscience
Bridging people, disciplines, and markets to affect meaningful change was also emphasized by Benedetto Marelli, mission director for the MIT Climate Project and associate professor of civil and environmental engineering at MIT.
“If we’re going to have a tangible impact on the trajectory of climate change in the next 10 years, we cannot do it alone,” he said. “We need to take care of ecology, health, mobility, the built environment, food, energy, policies, and trade and industry — and think about these as interconnected topics.”
Faculty speakers in this session offered a glimpse of nanoscale solutions for climate resiliency. Michael Strano, the Carbon P. Dubbs Professor of Chemical Engineering, presented his group’s work on using nanoparticles to turn waste methane and urea into renewable materials. Desirée Plata, the School of Engineering Distinguished Climate and Energy Professor, spoke about scaling carbon dioxide removal systems. Mechanical engineering professor Kripa Varanasi highlighted, among other projects, his lab’s work on improving agricultural spraying so pesticides adhere to crops, reducing agricultural pollution and cost.
In all of these presentations, the MIT faculty highlighted the tie between climate and the economy. “The economic systems that we have today are depleting to our resources, inherently polluting,” emphasized Plata. “The goal here is to use sustainable design to transition the global economy.”
What do people do at MIT.nano?
This is where MIT.nano comes in, offering shared access facilities where researchers can design creative solutions to these global challenges. “What do people do at MIT.nano?” asked associate director for Fab.nano Jorg Scholvin ’00, MNG ’01, PhD ’06 in the session on MIT.nano’s ecosystem. With 1,500 individuals and over 20 percent of MIT faculty labs using MIT.nano, it’s a difficult question to quickly answer. However, in a rapid-fire research showcase, students and postdocs gave a response that spanned 3D transistors and quantum devices to solar solutions and art restoration. Their work reflects the challenges and opportunities shared at the Nano Summit: developing technologies ready to scale, uniting disciplines to tackle complex problems, and gaining hands-on experience that prepares them to contribute to the future of hard tech.
The researchers’ enthusiasm carried the excitement and curiosity that President Kornbluth mentioned in her opening remarks, and that many faculty emphasized throughout the day. “The solutions to the problems we heard about today may come from inventions that don't exist yet,” said Strano. “These are some of the most creative people, here at MIT. I think we inspire each other.”
Robert N. Noyce (1953) Cleanroom at MIT.nano
Collaborative inspiration is not new to the MIT culture. The Nano Summit sessions focused on where we are today, and where we might be going in the future, but also reflected on how we arrived at this moment. Honoring visionaries of nanoscience and nanotechnology, President Emeritus L. Rafael Reif delivered the closing remarks and an exciting announcement — the dedication of the MIT.nano cleanroom complex. Made possible through a gift by Ray Stata SB ’57, SM ’58, this research space, 45,000 square feet of ISO 5, 6, and 7 cleanrooms, will be named the Robert N. Noyce (1953) Cleanroom.
“Ray Stata was — and is — the driving force behind nanoscale research at MIT,” said Reif. “I want to thank Ray, whose generosity has allowed MIT to honor Robert Noyce in such a fitting way.”
Ray Stata co-founded Analog Devices in 1965, and Noyce co-founded Fairchild Semiconductor in 1957, and later Intel in 1968. Noyce, widely regarded as the “Mayor of Silicon Valley,” became chair of the Semiconductor Industry Association in 1977, and over the next 40 years, semiconductor technology advanced a thousandfold, from micrometers to nanometers.
“Noyce was a pioneer of the semiconductor industry,” said Stata. “It is due to his leadership and remarkable contributions that electronics technology is where it is today. It is an honor to be able to name the MIT.nano cleanroom after Bob Noyce, creating a permanent tribute to his vision and accomplishments in the heart of the MIT campus.”
To conclude his remarks and the 2025 Nano Summit, Reif brought the nano journey back to today, highlighting technology giants such as Lisa Su ’90, SM ’91, PhD ’94, for whom Building 12, the home of MIT.nano, is named. “MIT has educated a large number of remarkable leaders in the semiconductor space,” said Reif. “Now, with the Robert Noyce Cleanroom, this amazing MIT community is ready to continue to shape the future with the next generation of nano discoveries — and the next generation of nano leaders, who will become living legends in their own time.”